PaintPlus

Description

[et_pb_section fb_built=”1″ _builder_version=”4.6.1″ _module_preset=”default” custom_padding=”0px||0px||false|false”][et_pb_row _builder_version=”4.6.1″ _module_preset=”default” width=”100%” max_width=”1200px”][et_pb_column type=”4_4″ _builder_version=”4.6.1″ _module_preset=”default”][et_pb_text admin_label=”Description” _builder_version=”4.7.7″ _module_preset=”default”]PaintPlus^® is a tough, water-based, hybrid floor coating that combines epoxy-like toughness with the flexibility and ease of use of latex paint. PaintPlus is designed for use over PerfectPrimer products and more.

Perfect for:

Garages
Driveways
Basements
Professional workshops
Light industrial areas
Warehouses
Concrete balconies and deck

Features:

• Safer and easier to apply than traditional epoxy systems
• Cleans up with water
• Non-toxic, low VOC
• Durable and flexible
• Chemical-resistant
• Low-odor
• For interior and exterior use
• Specified for use with all PerfectPrimer Products
• Suitable for heavy traffic areas (with second coat)
• Bonds Direct To Metal (DTM)

[/et_pb_text][et_pb_text admin_label=”Instructions” _builder_version=”4.7.7″ _module_preset=”default”]

Instructions for PaintPlus:

SURFACE CONDITION AND PREPARATION: All surfaces must be dry, clean, free of chalk and loose paint, grease, oil, wax, silicone, efflorescence etc. Asphalt and previously painted concrete must be scrubbed with PerfectCleaner according to label directions, or a strong detergent such as TSP. Rinse thoroughly with clean water and allow to stand until completely dry. New and/or unpainted concrete must be primed with PerfectPrimer first, or “etched” with a 25% solution of muriatic acid to water. Apply solution to concrete and allow to stand until bubbling ceases, rinse THOROUGHLY with clean water and allow to stand until completely dry. Wear proper eye, skin, and respiratory protection.

APPLICATION: Stir well to a smooth consistency immediately before use. Apply with a high 3/8″ or 1.2″ quality medium nap synthetic roller cover and a Nylon or Polyester brush.

UNPAINTED CONCRETE: First coat MUST be thinned with 1 pint of clean water per gallon of paint and brushed or rolled well into surface. Dries to touch in one hour, second coat may be applied after 12 hours dry time.

ASPHALT AND PREVIOUSLY PAINTED CONCRETE: Apply 2 coats allowing 12 hours between coats. For added slip prevention, up to one pound of clean and dry fine silica sand may be added to each gallon of paint. For best service, add sand in first coat material only. Stir occasionally during application to prevent settling of sand. Will take foot traffic in two hours, however, seven days curing time MUST elapse prior to automobile traffic exposure.
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]